|
|
|||||
|
|
MX Series Pleated Polypropylene Membrane Filter Cartridges contains a graded density filter media. It delivers superior flow rate and high throughput, with submicron particulate retention and high dirt holding capacity. Constructed of all FDA graded polypropylene components provides board chemical compatibility in wide range fluids and most industrial applications. Available length : 9.75", 10", 19.5", 20", 30", 40" Micron Rating : 0.1, 0.2, 0.45, 1, 5, and 10 micron
|
|
MX Series |
|
|
All Polypropylene Pleated Membrane Filter Cartridge |
|
|
|
PW Series Depth Wound Filter Cartridges are widely used for removing coarse particles from process fluids. The media and core are made of FDA compliant materials. The high dirt hold capacity with its high structural strength make it suitable for sediment removal from potable water and wide range of chemical solutions. Available length : 9.75", 10", 19.5", 20", 30", 40" Micron Rating : 1, 5, 10, 25 and 50 micron
|
|
PW Series |
|
|
Depth Wound Filter Cartridge |
|
|
|
CX Series Activated Carbon Filter Cartridges are made of bonded granular activated carbon and designed to remove chlorine, taste, odor, certain VOC's and sediment reduction down to 10 micron. They are constructed by FDA compliant materials and suitable for potable water, commercial, industrial and food service applications. Available length : 9.75", 10", 19.5", 20", 30", 40" Micron Rating : 10 micron
|
|
CX Series |
|
|
Activated Carbon Filter Cartridge |
|
|
|
BM Series Polypropylene Melt Blown Filter Cartridges are made by extruding 100% molten polypropylene into high velocity air stream and cooled down gradually to form a graded density. It meets NSF requirement and most economic used in the pre-filtration for potable water, chemicals, food, beverage and other applications. Available length : 9.75", 10", 19.5", 20", 30", 40" Micron Rating : 1, 5, 10, 25, 50 and 75 micron
|
|
BM Series |
|
|
Polypropylene Melt Blown Filter Cartridge |
|
|
|
PX Series Pleated Polyester Filter Cartridges are made of durable, reusable and cleanable polyester. The large surface area and high porosity of the media allows for high flow rates, long filter runs with high dirt holding capacity and low pressure drop. They are designed for medium fine residential, commercial and industrial filtration application. The larger diameter BB version can be fitted in U.S. standard Big Blue filter housings. Available length : 9.75", 10", 19.5", 20", 30", 40" Micron Rating : 1, 5, 10, 30 and 50 micron
|
|
PX Series |
|
|
Pleated Polyester Filter Cartridge |
|
